Nicht eingeloggt.
Passwort vergessen?


Bitte erst registrieren. Danach ist es möglich Beiträge zu schreiben.



 Nach unten   Vorheriges Thema   Nächstes Thema

#1
How to identify original Hyper Fighting release carts?
Geschrieben am: 03.02.2020 9:04
VB Gamer
Dabei seit 02.02.2020
10 Beiträge
It looks like theres a couple different people making Hyper Fighting carts out there. Was wondering if anyone knew what the original run boards look like (or some other way to identify them)?
Nach oben

#2
Re: How to identify original Hyper Fighting release carts?
Geschrieben am: 03.02.2020 16:27
PVB Elite
Dabei seit 17.06.2013
Kanada
1210 Beiträge
Top10 Poster10+ Game RatingsLong Time User (6 Years)
The best way to tell would be the box and manual(I'm assuming you'd be going by pictures and can't take a look at the board itself). The original run were all CIB. I made a video of mine and VectrexRoli made a video on his, I believe in both our videos we go into detail about the box and manual.
I'm not sure how many of the 'repro' runs came as CIB, but it's harder to copy all 3 parts then just to copy the cart sticker. Now the board inside the cart would be a sure fire way but usually you don't get to see it in a sale.
Nach oben

#3
Re: How to identify original Hyper Fighting release carts?
Geschrieben am: 03.02.2020 16:43
Nintendoid!
Dabei seit 09.09.2013
USA
116 Beiträge
10+ Game RatingsLong Time User (6 Years)
I don’t know what the original board looks like but I do know if they look like these then they aren’t original
deleted photos my bad, I wasn't home to take my own photos. Its been so long I cant believe I forgot it was this weird color
Bearbeitet von Schwanck am 04.02.2020 18:32:50
Bearbeitet von Schwanck am 04.02.2020 18:33:05
Bearbeitet von Schwanck am 05.02.2020 2:25:48
Nach oben

#4
Re: How to identify original Hyper Fighting release carts?
Geschrieben am: 03.02.2020 18:17
VB Gamer
Dabei seit 02.02.2020
10 Beiträge
Actually, I own a Hyper Fighting that I have no clue of it's origin so I can open it up but I'm also curious to know what the originals look like too.

Does anyone have a shot of what the inside of an original run looks like?
Nach oben

#5
Re: How to identify original Hyper Fighting release carts?
Geschrieben am: 03.02.2020 23:00
PVB Elite
Dabei seit 17.06.2013
Kanada
1210 Beiträge
Top10 Poster10+ Game RatingsLong Time User (6 Years)
There's a picture on here that was posted during production, but that was quite a while ago...

I can post a picture of mine later tonight.
Nach oben

#6
Re: How to identify original Hyper Fighting release carts?
Geschrieben am: 04.02.2020 16:59
PVB Elite
Dabei seit 17.06.2013
Kanada
1210 Beiträge
Top10 Poster10+ Game RatingsLong Time User (6 Years)
And this is why I need to make myself notes, lol.

Here's what it looks like inside.

Datei anhängen:



jpg  IMG_6534.JPG (6,687.81 KB)
3422_5e3994bd43c66.jpg 5184X3456 px

jpg  IMG_6531.JPG (5,632.02 KB)
3422_5e3994d0cee9c.jpg 5184X3456 px
Nach oben

#7
Re: How to identify original Hyper Fighting release carts?
Geschrieben am: 04.02.2020 17:18
VUE(xpert)
Dabei seit 15.12.2016
USA
393 Beiträge
Long Time User (3 Years)
Zitat:

Schwanck wrote:
I don’t know what the original board looks like but I do know if they look like these then they aren’t original


The first and third pictures are my 16Mbit carts. They won’t hold HF. The middle 32Mbit one is my new cart and it will hold HF. So will my discontinued 128/256 carts.
Nach oben

#8
Re: How to identify original Hyper Fighting release carts?
Geschrieben am: 04.02.2020 18:46
VB Gamer
Dabei seit 02.02.2020
10 Beiträge
Zitat:

speedyink wrote:
And this is why I need to make myself notes, lol.

Here's what it looks like inside.



oh awesome! thanks for posting! Looks like my cart is the same as yours. I also have that same cutout in the shell to make room for the battery. haha.

Does your case bulge slightly around the connector? My case needs to be squeezed some to get it back on and pushes up a little by the connector. Looks like, for me at least, its due to the solder joints sticking up a bit on the connector. Maybe ill take my iron to then and level them out some more.

Datei anhängen:



jpg  20200203_231422.jpg (3,100.08 KB)
15496_5e39ac752c477.jpg 4032X3024 px
Bearbeitet von VueFinder am 04.02.2020 19:05:56
Nach oben

#9
Re: How to identify original Hyper Fighting release carts?
Geschrieben am: 04.02.2020 21:58
PVB Elite
Dabei seit 17.06.2013
Kanada
1210 Beiträge
Top10 Poster10+ Game RatingsLong Time User (6 Years)
I didn't notice that this morning, no. Maybe had to squeeze a little to slide it in proper but I don't think enough for a bulge
Nach oben

#10
Re: How to identify original Hyper Fighting release carts?
Geschrieben am: 06.02.2020 5:25
VB Gamer
Dabei seit 02.02.2020
10 Beiträge
ah. Is yours a little tight when pushing it into the virtual boy? Like compared to a normal game?

Any idea who actually made the boards for these? My understanding is Uncle Tusk did the box art, MK/Anon the game, but who did the hardware?
Nach oben

 Nach oben   Vorheriges Thema   Nächstes Thema


Bitte erst registrieren. Danach ist es möglich Beiträge zu schreiben.