Nicht eingeloggt.
Passwort vergessen?


Bitte erst registrieren. Danach ist es möglich Beiträge zu schreiben.



 Nach unten   Vorheriges Thema   Nächstes Thema

#51
Re: Display ribbon cable alternatives
Geschrieben am: 09.04.2019 13:38
Nintendoid!
Dabei seit 21.07.2016
158 Beiträge
Long Time User (3 Years)
The motherboard side goes into the FPC connector pins downward. When installed, the LED side needs to be on the other side to be solderable. It does look weird at first blush, but it is correct.
Nach oben

#52
Re: Display ribbon cable alternatives
Geschrieben am: 09.04.2019 13:46
PVB Elite
Dabei seit 30.12.2009
Niederlande
545 Beiträge
Highscore Top10Highscore Top ScoreContributor10+ Game RatingsLong Time User (9 Years)
Zitat:

RetroDan wrote:
The motherboard side goes into the FPC connector pins downward. When installed, the LED side needs to be on the other side to be solderable. It does look weird at first blush, but it is correct.


Ahhhh, that makes sense, I get it now and sounds pretty logical. Thanks!
Nach oben

#53
Re: Display ribbon cable alternatives
Geschrieben am: 13.04.2019 16:58
Nintendoid!
Dabei seit 21.07.2016
158 Beiträge
Long Time User (3 Years)
I have been wondering why several of the prospective buyers haven't responded. I'm only now realizing that, somehow, I never actually PM'd some of them.

Derp! Mea culpa; PMs have been sent out.

In addition, I'm planning on adjusting the order and sending it in by the end of May at the latest, with an estimated in-hand time of the second week of June. Of course, if enough people respond sooner, I can send the order in sooner, and get the parts in quicker.

So here's how this is going to go down:

When I put in the order, I'll shoot PMs and emails to those who have indicated interest. Now, I'm not going to demand payment before I send the order in, but it would definitely help. I'm dropping quite a bit on this project up-front, and between this and my recent 3D printer purchase, I'm not going to be buying model paints for a bit. Obviously, I will require payment before shipping.

Looking forward to seeing this through!

EDIT: If you're interested, but didn't PM me or get a PM, there's still time to be added to the list! You have until May 31st to let me know your shipping address and how many pairs of cables you'd like. Orders close on June 1st, 17:00 US Central Time. Cost is $11/pair, with $7.90 shipping in the US, and exact shipping per-destination outside of the US.
Bearbeitet von RetroDan am 13.04.2019 19:02:54
Bearbeitet von RetroDan am 13.04.2019 19:03:42
Bearbeitet von RetroDan am 13.04.2019 22:35:04
Bearbeitet von RetroDan am 14.04.2019 21:21:36
Nach oben

#54
Re: Display ribbon cable alternatives
Geschrieben am: 20.04.2019 4:19
Nintendoid!
Dabei seit 21.07.2016
158 Beiträge
Long Time User (3 Years)
As of right now, enough people have responded to ensure that 101 pairs of the VirtualCable get a home.

That's honestly more than I expected. Only five people haven't responded (with six pairs of cables between them), though I know for a fact that they've seen my messages. As it stands, 94.39% of those who indicated interest have confirmed their place. That's pretty good, as far as I'm concerned.

I've decided that I'm going to order however many I have guaranteed buyers for, plus a small number of extra for latecomers or if someone finds they want some more. Extras outside of the original allocation are going to be priced at $15/pair, which I have determined to be neither outrageously expensive, and will allow me to recoup some of the costs from this run.

I am, ultimately, coming out ahead, but the margin is pretty tight. I would strongly recommend that if anyone feels they may need or would like more, get in contact with me before June 1st - this is likely to be the only such run of this project, and I will not have more than a mere handful in reserve.
Nach oben

#55
Re: Display ribbon cable alternatives
Geschrieben am: 20.04.2019 16:54
Virtual Freak
Dabei seit 23.04.2008
Großbritannien
77 Beiträge
ContributorLong Time User (11 Years)
Great news. These will be very useful to have.
Nach oben

#56
Re: Display ribbon cable alternatives
Geschrieben am: 22.04.2019 19:18
Virtual Freak
Dabei seit 15.09.2017
66 Beiträge
Long Time User (2 Years)
I guess I better get in on this, PM incoming
Nach oben

#57
Re: Display ribbon cable alternatives
Geschrieben am: 22.04.2019 21:37
Newbie
Dabei seit 31.03.2019
6 Beiträge
Dan,

I signed up but no longer need one as I had NESfreak do his welding fix.

Just wanted to give you a heads up.

Best Regards,

Fish1717
Nach oben

#58
Re: Display ribbon cable alternatives
Geschrieben am: 23.04.2019 0:22
Nintendoid!
Dabei seit 21.07.2016
158 Beiträge
Long Time User (3 Years)
As of right now, the five users who still have not responded to my followup interest check have been dropped from the list. Sorry, gents - poor communication makes me uncomfortable as a seller.


Zitat:

Fish17 wrote:
Dan,

I signed up but no longer need one as I had NESfreak do his welding fix.

Just wanted to give you a heads up.

Best Regards,

Fish1717


That's perfectly alright. Not to disparage NESfreak's work at all, but he is working with 23 year old cables. Time will get to them eventually, no matter how excellent his work. My project is oriented towards a slightly different solution - new cables, installed correctly this time around, which should add another quarter-century onto the VB's lifespan, or just about the time that the chips on the VB start failing due to age.
Bearbeitet von RetroDan am 23.04.2019 0:52:38
Nach oben

#59
Re: Display ribbon cable alternatives
Geschrieben am: 23.04.2019 16:38
Newbie
Dabei seit 10.06.2016
6 Beiträge
Long Time User (3 Years)
I'll take a set too. I don't need them, but I'll make sure to do a writeup when they come in. Heck, maybe I'll restore another VB just for this...
Nach oben

#60
Re: Display ribbon cable alternatives
Geschrieben am: 30.04.2019 0:12
Nintendoid!
Dabei seit 21.07.2016
158 Beiträge
Long Time User (3 Years)
Okay a quick update:

I'm putting the order in at the end of May, so any changes to quantity or new orders need to be in to me by 17:00 US Central Time on June 1st. Estimated time for production and shipping to me is about ten days (I love DHL).

I'm thinking of making a slight modification to the design, based on my experiences with the prototypes. First, I'm considering adding a strip of 3M tape under the solder end to assist with stabilization and to help protect against pull damage. If I did this, though, the cost would go up yet another dollar per pair, so I'd like buyer's inputs on that.

Secondly, I'm trying to see if I can get castellated holes at the solder end of each cable for ease-of-installation. The prototypes' main problem was that they were very thick, being almost 0.25mm thick at the solder end, which is almost double what they should be. In addition, the solder ends terminated on the top layer, leaving a barrier of polyamide between the pads of the cable and the pads of the board. This made installation extremely difficult and time-consuming. By ending in castellated holes, there will be direct metal-to-metal contact for a solid solder bond, eliminating this issue. I've sent a potential revision including this off to my fab house for pricing.

Alternately, I could design an alternate version as a single-layer cable. In this option, the LED board and cable pads would be pre-tinned by the user and pressed together, held by 3M tape, and then soldered by pressing a wide solder tip to the back of the polyamide. This would be more difficult to pull off for the end user, but would provide an amazingly strong connection.

Let me know what you think!
Bearbeitet von RetroDan am 04.05.2019 3:33:18
Nach oben

 Nach oben   Vorheriges Thema   Nächstes Thema


Bitte erst registrieren. Danach ist es möglich Beiträge zu schreiben.