You are not logged in.
Lost Password?


Register To Post



 Bottom   Previous Topic   Next Topic

#11
Re: Virtual Boy DS Case Art
Posted on: 2/28 18:16
Virtual Freak
Joined 2017/11/11
USA
88 Posts
Long Time User (2 Years)
Making the cases wasn't all too hard. Granted the red ones are not possible to find currently, but black ones look great still on the shelf. You can take an exacto knife and cut out the holders on the inside and then I bought thin foam sheets at Target and made a stencil and cut them to fit and then put a piece of solid foam at the back to cover the holes inside so you can;t see through to the holes in the plastic at the back.

In all honesty if just putting them up on a shelf they dont need to be super fancy or expensive. They hold the games just fine for me!

Here is what the end product looked like and and I have some with different colored foam inside as the pack I bought at Target was in rainbow colors. But again these are sitting on a shelf and no one can see the inside but me so I could care less if some of them are purple or pink instead of red on the inside.

Attach file:



jpg  52893182_372940353526950_1448397121219723264_n.jpg (63.12 KB)
14576_5c78172e80119.jpg 400X720 px

jpg  52980457_582441038898150_4452866223834660864_n.jpg (75.07 KB)
14576_5c78173edc0f7.jpg 400X720 px

jpg  53468169_777655549268461_6114337643271553024_n.jpg (245.72 KB)
14576_5c78174ca83a9.jpg 2016X1134 px
Top

#12
Re: Virtual Boy DS Case Art
Posted on: 2/28 18:48
Virtual Freak
Joined 1/27
USA
94 Posts
Well I don't have a good hand at cutting foam or a pro tool to stencil and clean slice the thing. Mine is rough, hacked away at looking in spots and I didn't dare make that thumb half circle up top but it fits snuggly enough. I had a spare red case so I just used a leatherman blade to slice fairly smoothly the DS clip out, and that hides well under the cover art I printed which comes off faded since I didn't use high quality paper or print settings either.

I figured when the time was right I'd just get someone else to do it as I lack the proper supplies.

What you did there looks great and I just used the red as I had it, either would be fine.


I've attached a quick pic of the usable creation in all its ugliness.

Attach file:



jpg  IMG_1447.jpg (445.50 KB)
14928_5c781efd06eb6.jpg 960X1280 px
Top

#13
Re: Virtual Boy DS Case Art
Posted on: 2/28 18:53
Virtual Freak
Joined 2017/11/11
USA
88 Posts
Long Time User (2 Years)
That is awesome that you had a red case. I wished I could find them but it wasn't possible. But still black is fine for me. As for the cutting, I used scissors and that's how I was able to get it to look so smooth. I bent the foam and made a slit in the middle then cut to the edge and then followed the stencil I drew on the foam in pen. Made a little slit at the top for using your finger to pull the game out too.
Top

#14
Re: Virtual Boy DS Case Art
Posted on: 2/28 18:55
Virtual Freak
Joined 1/27
USA
94 Posts
I have a small xacto knife and I had used the FB itself with a light pencil as a stencil then went about just slowly cutting along but the material kept snagging. I had initially pierced it using the same blade as the case cutting as it's a very very thin point to it. Either way, it's ugly and useable so it'll be fine for now and I could just leave it depending.

I've got 3 games now, another 3 in the mail shortly, but before them I've got 6 boxes+manuals arriving Saturday to games I mostly have yet to get and one is a double of a box (Mario Clash.) I won't be storing them in there, bad idea due to the age, so that's why these cases are appealing.
Top

#15
Re: Virtual Boy DS Case Art
Posted on: 3/20 18:40
Virtual Freak
Joined 2017/11/11
USA
88 Posts
Long Time User (2 Years)
Hey Levine91 do you happen to have an English translated version of the Innsmouth mansion cover? All I could find is the Japanese cover on your link and nowhere else online for one!
Top

#16
Re: Virtual Boy DS Case Art
Posted on: 10/27 17:02
Virtual Freak
Joined 2017/11/11
USA
88 Posts
Long Time User (2 Years)
I need to rehash this one. Does anyone have an English translated Innsmouth cover? The Japanese one is the one one I could find.
Top

#17
Re: Virtual Boy DS Case Art
Posted on: 10/28 1:35
Nintendoid!
Joined 2016/5/12
USA
147 Posts
Long Time User (3 Years)
Quote:

UHATEIT wrote:
Hey Levine91 do you happen to have an English translated version of the Innsmouth mansion cover? All I could find is the Japanese cover on your link and nowhere else online for one!


Unfortunately I don't have it. I'm not sure it was ever made (and shared). If anyone has the ability to make this, it would be greatly appreciated.
Top

#18
Re: Virtual Boy DS Case Art
Posted on: 10/28 1:46
Virtual Freak
Joined 2017/11/11
USA
88 Posts
Long Time User (2 Years)
Definitely sad to hear. That's one of the better Japanese games that needs a good cover. Ah well!
Top

#19
Re: Virtual Boy DS Case Art
Posted on: 10/28 8:23
Nintendoid!
Joined 2017/1/9
USA
110 Posts
Long Time User (2 Years)
Here ya go~
You should be able to just overlay this on your template you had. :)

Attach file:



png  InnsmouthMansion_Cover.png (1,619.55 KB)
14272_5db69763d7445.png 1238X805 px
Top

#20
Re: Virtual Boy DS Case Art
Posted on: 10/28 18:00
Virtual Freak
Joined 2017/11/11
USA
88 Posts
Long Time User (2 Years)
Sweet that works for the cover portion if using a template. I was just downloading the premade inserts, seems most of the Japanese ones have a translation but Innsmouth doesn't. This is the one in that folder so the front, sides, and back all need a redo.

Attach file:



png  Innsmouth no Yakata (Japan).png (6,749.33 KB)
14576_5db71e4ed1a89.png 3261X1370 px
Top

 Top   Previous Topic   Next Topic


Register To Post