You are not logged in.
Lost Password?


Register To Post



 Bottom   Previous Topic   Next Topic

#1
[Guide] Cardboard Inserts
Posted on: 2013/8/14 22:22
PVB Elite
Joined 2011/7/1
Germany
1109 Posts
CoderContributorTop10 PosterLong Time User (8 Years) App CoderPVBCC 2013 Entry
As the VB cardbord inserts are hard to get I prepared a little guide how to make them by modifying GameBoy inserts.

The first thing you want to do is buy some GameBoy inserts. Here are some links where you can find them:

http://www.gameprotecting.com/c-2005626/gameboy-inserts/
http://www.videogameboxprotectors.com/#/store/4569532134
http://www.google.com

They should look like in picture 1.

The next thing you want to do is flip the insert over and completely remove the two pieces marked in picture 2. Afterwards they should look like in picture 3.

The next thing you want to do is extend the area that will hold the card. So flip the insert over again and scratch/cut a straight line next to both sides of this area. Don't cut through the cardboard, it should just be deep enough to make the bending easier. The cut should be 2cm (0.787401575 inches) away from the edge of the box (see images 4 and 5).

Now cut through the cardboard at the four edges displayed in image 6 and bend the inner sides up (also displayed in image 6).

Now fold the insert and bend the inner sides down as displayed in image 7.

Now flip the insert over and put some transparent sticky tape around the edges marked on image 8.

Finally, put your game into the insert as displayed on image 9. If you did everything right it should fit perfectly.

Attach file:



jpg  step1.jpg (123.46 KB)
1709_520be649873df.jpg 500X333 px

jpg  step2.jpg (94.48 KB)
1709_520be65f7f7ca.jpg 500X333 px

jpg  step3.jpg (126.54 KB)
1709_520be67026bc5.jpg 500X333 px

jpg  step4.jpg (105.88 KB)
1709_520be68100f58.jpg 500X333 px

jpg  step5.jpg (97.84 KB)
1709_520be6907fef6.jpg 500X333 px

jpg  step6.jpg (133.05 KB)
1709_520be6a0e120b.jpg 500X333 px

jpg  step7.jpg (122.88 KB)
1709_520be6b3be1fc.jpg 500X333 px

jpg  step8.jpg (123.70 KB)
1709_520be6c8081a9.jpg 500X333 px

jpg  step9.jpg (158.83 KB)
1709_520be6e5b1791.jpg 500X333 px
Top

#2
Re: [Guide] Cardboard Inserts
Posted on: 2013/8/15 0:02
Virtual Freak
Joined 2013/8/3
USA
60 Posts
Long Time User (5 Years)
Thanks a bunch!!
Top

#3
Re: [Guide] Cardboard Inserts
Posted on: 2013/8/18 16:06
VUE(xpert)
Joined 2010/10/23
Great Britain
385 Posts
10+ Game RatingsLong Time User (8 Years) Donator
Nice guide. Thanks thunder.
Top

 Top   Previous Topic   Next Topic


Register To Post