Nicht eingeloggt.
Passwort vergessen?


Bitte erst registrieren. Danach ist es möglich Beiträge zu schreiben.



 Nach unten   Vorheriges Thema   Nächstes Thema

#1
AC Adapter damaged?
Geschrieben am: 09.09.2003 13:01
PVB Staff
Dabei seit 25.07.2003
Deutschland
31 Beiträge
Long Time User (15 Years)
My VB won't work with my AC Adapter anymore. :( What could be the problem here, I checked all the problem sources but it still wont work.
Nach oben

#2
Re: AC Adapter damaged?
Geschrieben am: 09.09.2003 23:57
PVB Elite
Dabei seit 26.07.2003
USA
1464 Beiträge
PVBCC EntryCoderContributorSpecial AchievementTop10 PosterHOTY09 EntryLong Time User (15 Years) App Coder20+ Game RatingsPVBCC 2013 Entry
1) Check the voltage at the end of the AC adapter.
If it's not 6-15VDC, get a new adapter and/or go to step 4.
2) Check the voltage at the terminals (on the tap) that connect to the VB pad.
If it's not 6-15VDC, get a new tap and/or go to step 4.
3) With the pad's switch on, check the voltage across pins 5 and 6 on this diagram:

Open in new window


If it's not 6-15VDC, get a new pad and go to step 5.
4) If you can't get a new adapter or tap, perform "trafo mod" and proceed to step 5.
5) VB ON!

Hope that helps...

PS: The VB also requires a certain amount of current to run. I'm not sure what the minimum is, but 800mA to 1A should be a safe bet, even with "other stuff" attached (e.g. possible future expansion devices, etc.)

- RunnerPack

Post Edited (09-12-03 07:09)
Nach oben

#3
Re: AC Adapter damaged?
Geschrieben am: 11.09.2003 10:25
PVB Staff
Dabei seit 25.07.2003
Deutschland
31 Beiträge
Long Time User (15 Years)
Wow thanks. But fortunally it worked today. Strange, cause I tested it more then 1 hour two days ago. :)
Nach oben

 Nach oben   Vorheriges Thema   Nächstes Thema


Bitte erst registrieren. Danach ist es möglich Beiträge zu schreiben.