Planet Virtual Boy

I was chatting with morintari yesterday and he mentioned the adjustable stand, the one that never got released, and if it was possible to make it. To make an exact copy would be very costly but i did do a design for one a while back using aluminum extrusion profile some laminate board and an existing stand bracket, so this design would replace a stand as it needs the bracket.
the unit can be adjusted up and down the length and clamped in place with the clamp lever, its only rough but would probably work ok.
Anyway i said i would post a pic of it so here goes....

Hey HT thanks for the post. The pic looks great is there anyway that you can figure out what one of these babys would cost before you produce it. Also can't decide if I should order your stand fix kit or save up for the adjustable stand. Are you going to work on parts to replace the stand clamp as well. And finnally if doing a rebatch of the stand fix kits can you make them black instead of silver. Please forgive me if it's just not do-able.

Is this something your actually thinking of making ?? if so..wow dude..just let me know where to send the check :)

-Eric

Great work, as usual! I'm intrigued by the latching mechanism, but (as a tall guy who has to "slouch" over the stock VB) I don't like the way it slopes away from the user. Maybe a "shoulder" could be added between the base and the extrusion.

Also, it shouldn't be too difficult to come up with a VB-compatible clamp to avoid "cannibalizing" stock ones.

I never really liked the stock clamp..seemed to be kinda a pain to take the vb on and off..anyone else have trouble with it ?

-Eric

Thanks for the feedback chaps, this was only a design using stuff i got here at work, its not practical as it uses existing bits, but like Runnerpack says a clamping mech could be designed, another project.
I might make one of these up some time to see if it works, but its not high on my priorities so could take a while.
I'll figure out a rough price for what i have done and let you all know. :)

Sorry Hedgetrimmer but iv stolen your idea. Its still work in progress, im not sure how im going to mount my VB yet, i may have to butcher an official stand.
Just something to pass the time when nothing is broken at work.lol.

Hell yeah they look sweet.
I have actually made one myself, not got any photos yet but heres a render. I have also designed and made a sprung clamp unit that holds the VB nice n solid.
I could send you some dimensioned drawings if you can use a mill you can make one up, just need some 15mm thick PVC (or similar) some shoulder screws and springs, took me about 2 hours to make it.
This has height & angle adjustment. I will have to take some pics with my VB unit in place and post em later.

Looks like a good stand for the system. The original one can't support the weight of the head set well.

Glad you like it. Your new one looks great, good idea for the spring clamp.
Yeah if you don't mind, I'm ok with a mill but got a mate who is s**t hot. Better than messing up a proper stand, which I didn't really want to do.